System produces approx. 16 barrels per hour. Tandem barrels carry two (2) 18"x30" at the rate of eight (8) workbars per hour.

Two (2) programmable hoists provided, each with 1000 lb. lift capacity and SEW Eurodrives.

Allen-Bradley SLC 500

32" anode rod centers. System could be run as a combination barrel and rack system.

Electrical: 480V/3PH/60HZ

System heating was via 220 degree hot water, with a 3 hour heat up time, assuming 65°F ambient.

120 ton Carrier chiller provides cooling water
at 45°F, 200gpm.

Inverted "U", floor mounted superstructure was disassembled & warehoused with other equipment.

Includes SPECIAL vibratory-feed load/unload/drying systems (had been used for various nails).

Two(2) 15000 amp/15 volt PEC rectifiers for zinc and one (1) 2000 amp/15 volt PEC rectifier for electrocleaning.

7000 GPH Mefiag filter system.

Push-air blower.