Used Plating Equipment - Wet Process Line

Automatic and
Manual Plating Lines
Hoists
Process Tanks
Centrifugal Dryers
Power Supplies
Pulse Plating Rectifiers
Misc. Accessories

PRICE REDUCED!!
2000 VINTAGE 3-HOIST, DOUBLE WORKBAR ZINC PLATING LINE

2000 VINTAGE 3-HOIST, DOUBLE WORKBAR ZINC PLATING LINE
System can be sub-divided into multiple, smaller lines

(3) 1500# stainless steel hoists-travel & lift frequency drives
Accommodates either wider or dual single workbars
Single workbars designed for 7500 amperes each,
on 28” centers, OR single WIDE (d.o.t.) workload….
Automatic hoist drip trays

Laser hoist positioning
Stabilizers to minimize rack sway
Removable anode bars
Tanks are 144” L x 52” W x 87” D
Effective work area=132” L x 38” W x76” D

(8) Stations of load & unload available. The 7’ 3”
deep tanks allow operators to work safely below
hoists’ operating/transfer level.

Exhausted tanks have pneumatic tank covers to
minimize exhaust and heated make-up air

Special spray rinsing systems using high pressure pumps and 5-station, off-line counter-flow rinses.

System was used for alkaline zinc, with off-line zinc regeneration system, with robust polypro zinc tanks, and can be adapted for acid, chloride zinc.