Used Plating Equipment - Jessup Barrel Plating Line

Automatic and
Manual Plating Lines
Hoists
Process Tanks
Centrifugal Dryers
Power Supplies
Pulse Plating Rectifiers
Misc. Accessories

JESSUP BARREL PLATING LINE

JESSUP BARREL PLATING LINE

Large capacity (21" x 48" cylinders)
More than twice the volume/capacity of a 16" x 36"
Approx 9 loads/hr-2 hoists w/barrel-up rotation
New slotted barrels w/exterior stiffeners for reduced dragout (2006)
“U” shaped line w/inverted "U" superstructure
Approx 90 feet x 28 feet x 12 feet in height
Semi-automatic loading system with tipping
480/3/60 cycle input
9 cells of Acid Zinc
10,000 amp Rapid power supply

Drying is with centrifugal dryers (Desco)
MEFIAG model 13000-SY horiz. disc filter
w/slurry tank rated @ 13000 gallon/hr turnover
1997/98 chiller & graphite heat exchanger
(for the Zinc solution)
Heating coils designed for low pressure steam
(approx 15 psi)
Titanium anode baskets bolted directly to anode flight bars
(removable by special hoist)
Operational 16,000 cfm exhaust (fan) system
and push air blower

Excellent cleaning cycle:
PRE-SOAK, 2 CELL SOAK, COUNTERFLOW RINSE, ACID A. ACID B, COUNTERFLOW RINSE,
2 CELL ELECTROCLEAN, COUNTERFLOW RINSE, MILD ACID, SHUTTLE RINSE, ACID ZINC PLATE,
COUNTERFLOW RINSE, DILUTE ACID, RINSE, CLEAR CHROMATE, COUNTERFLOW RINSE,
YELLOW CHROMATE, COUNTERFLOW RINSE, WARM RINSE